In 2014 new laws will go into place regarding the use of the latch system for carseats. Personally i dont see why they are waiting to impliment this! For those who cant get to the articles, basically you need to weigh your child and carseat. If the combined weight is 65lbs or more you cant use latch and need to use the regular seatbelt. Latch was not designed to hold carseats that could hold kids up to 100lbs plus the weight of the seat. It may not hold the seat if you are in an accident.
ETA: you can not use BOTH the latch and a seatbelt. Here is why:
Should I use both the seat belt and the lower anchors to be sure my child is extra protected?
Securing the child safety seat by using either the lower anchors or the seat belt ofers the same level of protection when used correctly and according to both the child safety seat instructions and the vehicle owner’s manual. There is no evidence that the child is aforded additional protection when the lower anchors and the vehicle seat belt are used in conjunction with one another.
Lots of parents want an extra measure of security when it comes to their baby's protection on the road. This leads many parents to install car seats with both a vehicle seat belt and the LATCH system. Using two installation methods is not as safe as it sounds, though.
You should choose the installation method that allows you to get the best fit in your vehicle. The car seat is installed correctly when you can't move it more than an inch in any direction when you grab the car seat at the belt path, and when the car seat is at the proper angle, such as when rear-facing.
Car seats are designed to handle crash forces in specific ways. While we know, thanks to federally mandated crash testing, that baby's car seat will withstand crash forces when installed with the seat belt, or with the LATCH system, we do not know if the same car seat will withstand crash forces when both systems are used at the same time. Putting two installation belts through the same belt path could put stress on the car seat shell from two different angles during a crash, causing breakage. Using two installation belts could also concentrate more crash force on a small area of the car seat.
The rule of thumb to follow with installation is to never use your baby's car seat in a way that was not intended by the manufacturer. When you install the car seat using methods not outlined in the instruction manual, you are, in essence, using your child as the crash test dummy. We cannot be sure of what will happen when car seats are used in ways that have not been crash tested and approved. Read your car seat instructions and your vehicle owner's manual to find out how your car seat can be installed. If you cannot get the car seat installed tightly using either the vehicle seat belt or the LATCH system, find a certified child passenger safety technician or a car seat inspection station by visiting Safe Kids USA.
Heather Corley is a certified Child Passenger Safety Technician.
I have never used the latch. I don't think the carseat ODD had (she's almost 8) even had a latch system. I've always thought, as long as the seat belt had the locking mechanism, it was probably as safe or safer.